Weinmann & Schanz Bellavista 90 847 89, Руководство пользователя

Страница: 25 / 278

22
GB
23
The icon of the ASC function (see Ch. 4.3.1)
starts flashing. Press the key to activate the
function or the “-” key to de-activate it.
CHOICE OF PROGRAM
Press the ”Mode” key until the icon is dis-
played. Then press the ”Mode” and ”-” keys to-
gether and hold them both down for at least 3
seconds.
The program code (P1, P2, P3 and P4) flashes.
Press the “+” or “-” keys to set the program. Press
the “Mode” key to confirm.
PROGRAM P1 HOURS MODE
FROM MONDAY TO FRIDAY
0 - 6 Night/Eco
6 - 9 Comfort
9 - 16 Night/Eco
16 - 23 Comfort
23 - 0 Night/Eco
SATURDAY AND SUNDAY
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
PROGRAM P2 HOURS MODE
FROM MONDAY TO SUNDAY
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
PROGRAM P3 HOURS MODE
FROM MONDAY TO FRIDAY
0 - 6 Night/Eco
6 - 9 Comfort
9 - 13 Night/Eco
13 - 23 Comfort
23 - 0 Night/Eco
With the “P4” program, you can set different temperatures
(”Comfort” and ”Night/Eco”) over a 24 hour period for each
day of the week.
PROGRAM P4 - CUSTOM
4.2.5 CHRONO
In “Chrono” mode, you can select one of the three preset
chrono-thermostat programs or the custom program. The
latter lets you set various temperatures (”Comfort” and
”Night/Eco”) over a 24 hour period for each day of the week.
SETTING THE CURRENT DAy AND TIME
Before going on with the P4 custom program setup, check
that the hour and day of the week have been correctly set up.
If you fail to enter the setup in this way, press
the “Mode” key until the icon appears on
the display.
Then press the “Mode” key again and hold
it down until the number indicating the day
flashes.
Adjust the day of the week by using the “+“
or “-“ keys (1=MON, 2=TUE,…7=SUN), then
confirm by pressing the “Mode“ selection key.
Repeat the same procedure for the hours.
The minutes now start flashing. Use the “+” or
“-“ keys to set the minutes then press the key
to confirm and exit or press the “Mode” key to
enter the P4 program setup.
SETTING THE P4 PROGRAM
To enter the P4 custom program setup, press the “MODE” key
when you finish setting the minutes (see SETTING THE CUR -
RENT DAY AND TIME).
The time bar will now flash and the clock will show the time
being programmed.
Start with the first day. Choose by means of the “+” or “-” keys,
for each hour, between the “Comfort” temperature (two
lines) and the “Night/Eco” temperature (single line).
T Night/Eco T Comfort T Night/Eco
Press the “Mode“ selection key until the icon
appears on the LCD.
This operating mode is recommended when no people is in
the room for more than 1 day.
SATURDAY AND SUNDAY
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
Press the “Mode“ key to confirm and repeat the same
procedure for each day of the week.
The weekly program is now set.