Weidmuller WI-MOD-E-A Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 110

background image

Weidmuller Wireless Ethernet Modem & Device Server WI-MOD-E-G/A User Manual

Rev.

2.16

www.weidmuller.com

5

Limited Lifetime Warranty, Disclaimer and Limitation of Remedies

WEIDMULLER products are warranted free from manufacturing defects for the “serviceable lifetime” of the product. The
“serviceable lifetime” is limited to the availability of electronic components. If the serviceable life is reached in less than
three years following the original purchase from WEIDMULLER, WEIDMULLER will replace the product with an equivalent
product if an equivalent product is available.



This warranty does not extend to the following:



Failures caused by the operation of the equipment outside the particular product's specification, or



Use of the module not in accordance with this User Manual, or



Abuse, misuse, neglect or damage by external causes, or



Repairs, alterations, modifications undertaken other than by an authorized Service Agent.

WEIDMULLER liability under this warranty is limited to the replacement or repair of the product. This warranty is in lieu of
and exclusive of all other warranties. This warranty does not indemnify the purchaser of products for any consequential
claim for damages or loss of operations or profits and WEIDMULLER is not liable for any consequential damages or loss
of operations or profits resulting from the use of these products. WEIDMULLER is not liable for damages, losses, costs,
injury or harm incurred as a consequence of any representations, warranties or conditions made by WEIDMULLER or its
representatives or by any other party, except as expressed solely in this document.

GNU Free Documentation License:

Copyright (C) 2009 Weidmuller.

Weidmuller is using a part of Free Software code under the GNU General Public License in operating the “

WI-MOD-E

”

product. This General Public License applies to most of the Free Software Foundation’s code and to any other program
whose authors commit by using it. The Free Software is copyrighted by Free Software Foundation, Inc. and the program
is licensed “As is” without warranty of any kind. Users are free to contact Weidmuller at the following Email Address:
[email protected] for instructions on how to obtain the source code used in the “

WI-MOD-E

”.

A copy of the license is included in the section entitled "GNU Free Documentation License".

«
...
3
4
5
6
7
...
»

Содержание WI-MOD-E-A















































































































Отзывы:

Нет отзывов

Похожие инструкции для WI-MOD-E-A

Бренд: FastLinc Страницы: 20

Бренд: DAKO Страницы: 2

Бренд: Boca Страницы: 52

MOONLANDER 2 SCRYPT

Бренд: Futurebit Страницы: 12

NETRONIX THIAMIS 8535

Бренд: TSI Instruments Страницы: 4

Бренд: Patton electronics Страницы: 17

Elconnect Coax Client VoIP

Бренд: Elcon Страницы: 32

Бренд: Datum Systems Страницы: 94

Бренд: Sprint Страницы: 32

MultiModemII MT5600BR-V92

Бренд: Multitech Страницы: 8

MultiModem Cell MTCBA-C1

Бренд: Multitech Страницы: 29

Бренд: Multitech Страницы: 21

MultiConnect MTCM

Бренд: Multitech Страницы: 2

MultiConnect rCell 100 Series

Бренд: Multitech Страницы: 70

Бренд: Multitech Страницы: 4

Бренд: Multitech Страницы: 8

CommPlete MT5634HD8

Бренд: Multitech Страницы: 99

Dolphin Navigan Wireless Commissioner NWC 300

Бренд: EnOcean Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды