Weidmuller PrintJet PRO Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 106

Weidmuller PrintJet PRO Скачать руководство пользователя страница 91

Troubleshooting

5661290000/00/06.08

91

10.1.3 Error and status messages on

the display

This section describes the meaning of the display
messages, and what can be done when a message
appears on the display.

Power Off On / Call Service if error reoccurs

An error has occurred.
Switch the printer off and then on again. If the mes-
sage is still displayed, contact your The Weidmüller
service or sales representative.

Ready

The printer is able to print.

Printing...

Printer is currently printing.

Close Duplex Unit Cover

A cover or lid is opened. Close all covers and lids.

Close Top Cover or reset the Duplex Unit cor-
rectly

A cover or lid is opened. Close all covers and lids.
When this does not solve the problem, contact your
The Weidmüller service or sales representative.

Change Setting Tray #/

The paper format in the selected loader does not
correspond to the specified paper format.
Reset the driver settings using the M-Print

®

PRO

software.

Setting change

The printer is changing its settings. Please wait for a
moment.

Energy Saver

The printer is in low-energy mode. The printer is
ready for use.

Loading Ink...

Ink is being supplied. Please wait for a moment.

Ink Collector almost full

The ink waste pad is almost full.
Make sure that a new ink waste pad is readily avail-
able.

Ink Collector is full/Replace Ink Collector Unit

The ink waste pad is full. Replace it with a new one.

Read Chapter 9.6 “Replacing the ink col-
lector unit” for more information.

Network Interface Board Error

An error in the network interface board network func-
tion has occurred. Do the following:

1

Turn off the printer.

2

Switch on the printer again.

If the message is still displayed, contact your The
Weidmüller service or sales representative.

Guide Board is open/Close the Guide Board

Close all covers and lids.

Hardware Problem Ethernet

An error in the network interface board (ethernet
board) network function has occurred.

Resetting Job...

The printer is initializing a new print job.
Please wait for a moment.

«
...
89
90
91
92
93
...
»

Содержание PrintJet PRO











































































































Отзывы:

Нет отзывов