20
53.
Locate and open the parts bag labeled “SEAT
ASSEMBLY.”
Press a 25mm x 40mm Inner Cap (63) into the
bottom of a Seat Bracket (11). Press two 25mm x
50mm Inner Caps (70) into the ends of the Seat
Bracket.
Oreint the Seat (25) as shown. Attach the Seat to
the bracket on a Seat Bracket (11) with two M6 x
16mm Screws (90). Attach the other end of the
Seat to the Seat Bracket with an M6 x 45mm
Screw (98) and an M6 Washer (84).
Loosen the Adjustment Knob (not shown) by turn-
ing it counterclockwise, and pull it out as far as
possible. Insert the Seat Bracket (11) into the
Butterfly Seat Frame (10) and align an adjustment
hole with the Adjustment Knob. Snap the Knob into
the adjustment hole and turn it clockwise until it is
tight.
53
70
90
11
63
70
84
98
10
25
54. Attach the Butterfly Backrest (53) to the Butterfly
Upright (4) with two M6 x 65mm Screws (94) and
two M6 Washers (84).
54
53
4
84
84
55. Press a 25mm x 40mm Inner Cap (63) into the
bottom of the other Seat Bracket (11). Press two
25mm x 50mm Inner Caps (70) into the ends of
the Seat Bracket.
Orient the other Seat (25) as shown. Attach the
Seat to the bracket on the other Seat Bracket (11)
with two M6 x 16mm Screws (90). Attach the
other end of the Seat to the Seat Bracket with an
M6 x 45mm Screw (98) and an M6 Washer (84).
Loosen the Adjustment Knob (51) by turning it
counterclockwise, and pull it out as far as possi-
ble. Insert the Seat Bracket (11) into the Press
Seat Frame (12) and align an adjustment hole
with the Adjustment Knob. Snap the Knob into the
adjustment hole and turn it clockwise until it is
tight.
55
94
94
Seat Assembly
70
90
11
63
70
84
98
51
12
25
