8
5. Orient the Backrest Frames (16) so that the
welded tubes are in the positions shown.
Apply a small amount of the included grease to
an M10 x 180mm Bolt (54). Attach the Backrest
Brace (15) to the Backrest Frames (16) with the
Bolt, two M10 Washers (35), and an M10
Locknut (37).
Do not tighten the Locknut yet.
Orient the Backrest (19) as shown.
Attach the Backrest (19) to the Backrest
Frames (16) with four M6 x 40mm Screws (41)
and four M6 Washers (42).
Do not tighten the
Screws yet.
6. Apply a small amount of grease to an M10 x
195mm Bolt (43). Attach the Backrest Frames
(16) to the Frame (1) with the Bolt, two M10
Washers (35), and an M10 Locknut (37).
Do
not overtighten the Locknut; the Backrest
Frames should pivot easily.
Insert the end of the Backrest Brace (15) into
one of the slots in the Frame (1).
See step 5. Tighten the four M6 x 40mm
Screws (41) and the M10 Locknut (37). Do
not overtighten the Locknut; the Backrest
Brace (15) should pivot easily.
7. Apply a small amount of grease to the barrel of
an M10 x 73mm Bolt Set (45). Attach the Leg
Lever (5) to the Front Leg (4) with the Bolt Set.
Make sure that the barrel of the Bolt Set is
inserted through both sides of the bracket
on the Front Leg.
Then, attach the Weight Clip (8) to the weight
tube on the Leg Lever (5).
5
19
54
35
35
37
16
42
42
15
41
41
6
7
43
35
16
1
15
Slot
4
45
45
Grease
5
8
Grease
Welded
Tubes
Grease
35
37
