Weider Pro Lx7, Руководство пользователя

Страница: 8 / 23

8
5. Press a 60mm Square Cap (54) into the top of each
Upright (6, 7).
Press a 30mm Square Cap (57) into each end of the
Support Tube (8).
Place the Support Tube (8) in one set of adjustment
brackets (B) on the Uprights.
Make sure the Support Tube is securely inserted
into the adjustment brackets.
5
3. Slide the mounting bracket (A) on the Bench Frame
(1) onto the Carriage Bolts (30) in the Right and Left
Base (5, 4) and secure it with two M10 Nylon
Locknuts (37). Do not tighten the Nylon Locknuts
yet.
Fasten the mounting bracket on the Bench Frame (1)
to the Right and Left Base (5, 4) with two M10 x
72mm Bolts (27) and two M10 Nylon Locknuts
(37). Do not tighten the Nylon Locknuts yet.
3
27
37
37
1
37
30
30
5
4
A
54
8
57
B
57
B
54
4. Identify the Left and Right Upright (6, 7) by looking at
the upper two holes for the Weight Rests. On one
side the two holes are close together, and on the
other they are further apart.
Make sure both Uprights are oriented so the side
with the smallest gap between the holes is facing
the Seat of the bench (see inset drawing).
Slide the Left Upright (6) over the Bolts (30) in the
Left Base (4) and secure it with two M10 Nylon
Locknuts (37).
Mount the Right Upright (7) in the same way.
Tighten the Nylon Locknuts used in steps 1–4
now.
4
30
30
37
4
37
37
7
7
6
6
37
Holes for
Weight Rests
The Two
Upper
Holes Are
Close
Together