8
6. Apply grease to an M10 x 165mm Bolt (50).
Attach the Backrest Frames (16) to the Frame
(1) with the Bolt, two M10 Washers (55), and an
M10 Locknut (42). Set the end of the Backrest
Post (15) in one of the slots in the Frame.
Do
not overtighten the Locknut; the Backrest
Frames must pivot easily.
See step 5.
Tighten the M10 Locknut (42) and
the four M6 x 40mm Screws (51).
Do not over-
tighten the Locknut; the Backrest Post (15)
must pivot easily.
7. Attach the Weight Tube (24) to the Leg Lever
(5) with an M8 x 70mm Bolt (46), a Weight
Tube Spacer (41), two M8 Washers (49), and
an M8 Locknut (36). Then, press a 25mm
Round Outer Cap (29) onto the Weight Tube.
Apply grease to the barrel of an M10 x 77mm
Bolt Set (47). Attach the Leg Lever (5) to the
Front Leg (4) with the Bolt Set.
Make sure that
the barrel of the Bolt Set is inserted through
both sides of the bracket on the Front Leg.
6
7
16
1
42
15
Slot
55
50
55
4
47
47
Grease
Bracket
5
36 49
49
29
41
46
24
Grease
5. Apply a small portion of the included grease to
an M10 x 165mm Bolt (50). Attach the Backrest
Post (15) to the Backrest Frames (16) with the
Bolt, two M10 Washers (55), and an M10
Locknut (42).
Do not tighten the Locknut yet.
Attach the Backrest (19) to the Backrest
Frames (16) with four M6 x 40mm Screws (51)
and four M6 Washers (32).
Do not tighten the
Screws yet.
5
19
50
16
32
32
55
55
15
51
51
42
Grease
All manuals and user guides at all-guides.com
