1
INSTALLATION OF CERTIFIED ENGINES
Thank you for your recent purchase of an EPA certified WEICHAI nonroad and Stationary Industrial
Engine.
These instructions are intended to give the installer of the engine all the information that is necessary to
properly install the engine and related components into the equipment chassis. The United States
Environmental Protection Agency (EPA) requires that the manufacturer of the engine provide
installation instructions to the equipment manufacturers as defined in the Code of Federal Regulations
(40CFR 1048.130).
Failing to follow these instructions when installing a certified engine in a piece of nonroad equipment
violates federal law (40 CFR 1068.105(b)), subject to fines or other penalties as described in the Clean
Air Act.
This engine is certified to be used in mobile and stationary constant speed only equipment
applications. Do not install this engine for use in any variable speed applications!
This industrial engine comes fully equipped and certified with a complete emission control system which
includes the fuel system, sensors and actuators, a fully integrated engine management system, and an
exhaust aftertreatment system including a three-way catalyst. When this industrial engine is correctly
installed by an Original Equipment Manufacturer (OEM), it will meet or exceed the Emission Standards
for Large Spark Ignited (LSI) engines established by the US Environmental Protection Agency (EPA). This
engine has been certified to exhaust emission standards in 40 CFR Part 1048 and 40 CFR Part 60 JJJJ
including appropriate deterioration factors, over the regulated useful lifetime of seven years or 5000
hours, whichever occurs first.
Emission compliance throughout the useful lifetime requires proper engine maintenance. Please refer to
the maintenance schedule in the service manual for details.
WEICHAI & PSI SERVICE MANUALS AVAILABLE ONLINE AT FLYPARTSGUY.COM
GET YOUR WEICHAI & AFTERMARKET SERVICE PARTS AT FLYPARTSGUY.COM
