23
hose at the desired length. Remove the oil cap, sandwich the Oil Balance Line Block with provided
gaskets, place the oil fill neck assembly on top of the gasket and thread provided bolts into the four
holes. Ensure the fill neck is pointing at the 6
o’clock position so that oil poured into the filler neck will
drain into the engine and not on the ground. Torque bolts to 9 Nm. See
Figure 12 for reference.
When running the balance line from the oil level gauge to the Oil Balance Line Block, ensure there are no
peaks or valleys. The line must gradually increase from the gauge to the block.
Set the center of the gauge 4” from the bottom of the engine feet for
the correct level during operation.
WEICHAI & PSI SERVICE MANUALS AVAILABLE ONLINE AT FLYPARTSGUY.COM
GET YOUR WEICHAI & AFTERMARKET SERVICE PARTS AT FLYPARTSGUY.COM
