14
WG/WB81EC-B/FEB20/V1.1
Central Information Screen
Messages and unit status will be displayed on special LCD
screen, which informs the operator of some basic parameters
of the unit, such as driving speed, F/N/R, power level and
operating hours.
Note:
If the ignition key is turned to the “ON” position
for a few seconds before starting the motor, the battery
voltage will display in the area where the hours are normally
displayed.
Note:
The LCD indicators appear when each control meets
the “safe to start” mode (e.g. the indicator turns on when
the operator is in the seat).
Using the Parking Brake
• Press down the left pedal as far as it will go.
• Keep holding the pedal and lift the locking lever under the steering wheel. Then remove your foot from the
pedal, so the parking brake is locked on.
• To unlock the parking brake, press down the left pedal with your foot to release the parking brake and the
brake pedal.
Result: The parking brake prevents the machine from moving. If the machine moves, the parking brake
needs to be adjusted. Contact your local Weibang dealer for details.
Using the Key Switch
• Sit on the seat.
• Make sure the Drive Mode switch is in neutral.
• Make sure the Blade Control button is in the disengaged position.
• Check the starting conditions.
• Turn the key to the start position.
NOTE:
When operating the unit, any operator MUST sit properly on
the seat. The key switch must be turned to the start position before
engaging any other controls.
