13
WG/WB81EC-B/FEB20/V1.1
SET UP - Overview
Charging your new machine
The charging socket is located under the steering wheel.
Fig. 3
NOTE:
Your new machine may have insufficient power
after delivery. You need to plug in your machine to
help ensure it is fully charged before starting.
Charge the 72V lithium polymer battery for 12-15
hours to ensure a full charge. Carefully read the relevant
sections in the Owner’s Manual or ask your local
Weibang dealer for details. Charging should be carried
out in the ideal surrounding temperature of
Fig 3
32 to 104°F (0 to 40°C).
WARNING
Do not short circuit the battery wires. Remove any jewellery before working on or near the battery or electric
start system. Failure to follow these instructions could result in personal injury or property damage. Keep the
charger out of reach of children.
OPERATING CONTROLS
Switches and Buttons
NOTE:
The drive mode switch must be in the F (Forward) or N (Neutral) Position before starting the
blade motors.
