Transport rack for kitchen tops
Page: 8 of 8
File: D:\\Eigene Dateien\Bedienungsanleitungen\Transportgestell für Küchenarbeitsplatten.doc
Version / Erstellt am:
2 / 29.09.2003
•
To hook in the pole [A7] push the hook [B7] of the pole in direction of the grip of the
pole [C7]. To do this, unlock the clamp screw [B7] by turning it left and lock it again
after the adjustment.
•
Turn the grip [C7] about 90 degrees as you can see in the picture and move the pole in
an upright position as far as possible under the transport rack for kitchen tops.
•
Now move the hook [B7] of the tiller by unlocking the clamp screw as far down until it is
hooked at the brace of the A-support.
•
Lift the pole [A7] a bit from the ground and lock the clamp screw [B7] then. When doing
this take care that the hook [B7] won’t unlock when lifting the pole.
•
To unhook the pole unlock the clamp screw [B7] and push the hook to the grip. Lock
the clamp screw once again [B7] and move the pole out again.
Picture 5.7
– Hooking in the pole
7 Maintenance and inspection
The transport rack for kitchen tops needs no regular maintenance.
In the following chapter there is a list of the things the user of the transport rack for kitchen tops has to make by an
expert. The producer doesn’t show liable for damages caused by not paying attention to these instructions!
•
Pay attention to the safety regulations in chapter 4.3!
•
The company WEHA offers you a service to maintain your transport rack for kitchen tops.
Concerning ZH 1/428 this is a device which needs regular maintenance by an expert.
This inspection has to be done at least once a year.
•
Check the transport rack for kitchen tops and all strapping staffs once a year for rusty spots especially all welding seams. Check
especially the four hooks for the crane.
•
Remove the rust and protect this spot by putting on an anti corrosive agent such as spray of zinc.
•
Check all strapping staffs for damages and grazes and replace them if necessary.
•
Check the rubber surfaces for damages and replace them if necessary.
Repairs and welding (danger of intoxication) may only be done by persons having the appropriate
knowledge and abilities!
8 Part list
In the following chapter there is a part list fort he transport rack for kitchen tops. In order to guarantee you a trouble-free processing
please always indicate the details concerning the spare part (see the spare parts list), as quantity of spare parts, name of the spare part,
article number and if necessary the abbreviation.
Pos. Quantity
Description
Article/ Component
number
Tool
1
1
Basic frame for kitchen tops
2
1
A-support
3
28
rubber layer (when ordering tell us the wanted length)
Art. Nr. 8020608
4
8
strapping staff including lashing strap
Art. Nr. 8020730
Transport rack for kitchen tops
Transport rack for kitchen tops (double-sided)
Art. Nr. 8010480
Transport rack for kitchen tops „Mezzo“ (single-sided)
Art. Nr. 8010483
Transport rack for kitchen tops „Mobilo“ incl. pole
Art. Nr. SET080023
Pole for transport racks for kitchen tops „Mobilo“ (double-sided)
Art. Nr. 8010482
A7
B7
C7
D7
