Transport rack for kitchen tops
Page: 6 of 8
File: D:\\Eigene Dateien\Bedienungsanleitungen\Transportgestell für Küchenarbeitsplatten.doc
Version / Erstellt am:
2 / 29.09.2003
One may only put in stone slabs which can be saved by
at least two straps!
•
Depending on the length of the inserted kitchen tops,
you may use up to four straps depending on the length of the kitchen
tops.
•
Put the straps [A2] into the perforated rail [B2] as
close as possible to the kitchen tops.
Attention! Danger! Put the straps as close to the kitchen
tops as possible and take care to put the kitchen tops
into the device in the right way!
•
Now hook the strap in and strap it as you can see in the following
picture.
Picture 5.2
– Assembling the strapping device into the
perforated rail
•
Now put the hook [A3] of the strap into the eyelet [B3].
Attention! Danger of squeezing!
•
Pull the strap at the other end [C3] so far that the
strap touches completely the kitchen top and that the rubber coating is
squeezed a little bit.
•
To unleash the straps push the “PRESS” button at the locking device
[E3].The locking device is now unleashed and you can remove the
strap.
•
Now you can put out the inputted kitchen tops.
Picture 5.3
– Assembling the strap
6.2 Transporting the transport rack for kitchen tops
6.2.1 Transporting the transport rack for kitchen tops using a forklift truck
To transport the transport rack for kitchen tops you have to save the kitchen tops by suitable means
against toppling over and slipping!
•
To transport the transport rack for kitchen tops there are locators at each side of the
device [A4; B4].
•
Now the forks of the forklift truck have to be adjusted to the desired width.
•
Now drive into the locators completely until the forks touch the basic frame.
•
Now lift the transport rack for kitchen tops. Before doing this check whether the forks
of the forklift truck have a suitable lifting capacity.
Now transport the transport rack for kitchen tops to the desired place.
By doing this take care that the road you are using is even and
horizontal. Otherwise the transport rack for kitchen tops might slip of the
forks of the forklift truck.
•
Attention! The road you are using to transport the transport rack for kitchen
tops and also the place where you want to place it have to be even and
horizontal because otherwise the transport rack for kitchen tops might slip off
the forks of the forklift truck!
Picture 5.4
– Transporting by using the
forklift truck
A2
B2
B3
A3
D3
E3
A4
A4
B4
B4
C3
