Operation and Service Instructions
File: N:\Bedienungsanleitungen aktuell\WG800\Plattengreifer\mode d'emploi
Version / Erstellt am: 01 / 26.04.2005/Operation and Service Instructions Slab Grab JUMBO II
Page 5 of 8
5 Assembly
Please read carefully the information in the chapter „Assembly“and adhere to it precisely. The manufacturer or the Company WEHA-
Ludwig Werwein GmbH will not be held liable for any damage due to incorrect assembly.
On receipt of the goods, check the supplied commodity for any damages incurred during transportation and packing! Advise the
Manufacturer/Agent respectively the Transport Company immediately of any damages!
5.1 Scope of Delivery
Prior to assembly, please check to see if all necessary parts have been delivered.
Contact immediately the Dealer or the Manufacturer in the event the consignment is not complete.
Scope of Supply consists of:
1 x Slab Grab JUMBO II
1 x Operation and Service Instructions
5.2 Removing of the Transport Packaging
The Slab Grab JUMBO II is usually delivered in cardboard packaging.
Prior to unpacking, please compare the attached delivery note against the supplied articles!
Remove the transportation packing:
Release the adhesive strips and/or strapping bands and unpack the contents very carefully!
Be careful when unpacking the Slab Grab Jumbo II in order to prevent damages to the contents!
Strong blows to the building parts of the Slab Grab JUMBO II edges can damage the surface and other sections!
Dispose of the packing waste for recycling in accordance with the local guidelines!
5.3 Assembly Instructions
The Slab Grab JUMBO II is delivered completely assembled.
A mounting of individual parts is not required.
6 Operating Instructions for the Slab Grab JUMBO II
This Chapter should provide you with information to better understand the Slab Grab JUMBO II. Please read carefully the operating
instructions to obtain optimal service!
Please pay attention that the protective cover of the metal parts will not be damaged by sharp edges!
Any defects, caused by incorrect assembly and operation are not covered under the Warranty by the
dealer respectively the manufacturer!!
Strict attention should be given to the safety regulations stipulated in Chapter 4.3!!
6.1 Preparation of the Slab Grab JUMBO II
Prior to using the Slab Grab JUMBO II it must be cautiously opened and put on safety position.
Caution! Danger of Injury!!
Do not grasp the scissor area of the Slab Grab JUMBO II with the fingers!
There exists a danger of pinching!
