Operation and Service Instructions RR/QR/Magnum
File: N:\Bedienungsanleitungen aktuell\Bedienungsanleitungen_Fremdsprachlich\Englisch\Plattenständer
Erstellt 12.09.2013
Page 3 of 11
This exclamation mark, framed in an equilateral triangle, draws the o
perator’s attention to the fact that very important
directions are available and the operator should read and follow the information with particular interest.
Obligation to recycle waste materials into the production process and to safeguard the natural resources and protect
the environment.
Marking of switches, articles, etc. in the pictures of this operating manual. The first number begins with the letter A, for
the marking (e.g. article D) and the second number is the current numbering of the picture (e.g. picture 6.2) within a
section e.g. 6.1 Inspection. The marking always refers to the accompanying or following description; otherwise the
description refers to a marking in another picture.
4 Regulations for use of the Slab Stands
Please pay particular attention to the information concerning the use of the machine.
Attention: danger of injury!!
Inappropriate use leads to personal injuries and damage to materials!!
This machine is especially conceived for one or several application fields.
The following Chapter explains the possible applications and the possible dangers.
4.1 Field of Application of the Slab Stands
You have purchased a quality product of WEHA-Ludwig Werwein GmbH
The Slab Stand is a helping device, to facilitate the easy storage in an upright position e.g. monument stones, and assist you in your
work.
Please note the following special characteristics:
•
All steel construction components are galvanized.
•
Robust construction.
•
20 respectively 16 stable iron tubes to use as a bearing surface for the stone slabs.
4.2 Inappropriate Application
The slab stands can be used only to store stone slabs upright.
Use the slab stand for the intended purposes and avoid using any materials which can damage the metal or other parts of the device!
•
The slab stand is complete and particularly appropriate for the indicated ranges of application.
•
Do not store any slabs, which are too big, too small or too heavy as allowed.
•
Fasten the slabs carefully before placement and Check to see whether the lifting device is ready and suitable for use.
•
Don’t stay or walk under suspended load!
4.3 Safety Regulations
1.
Please read thoroughly these operating instructions before using the Slab Stands!
2.
Keep the operating instructions carefully in the proximity of the slab stand, for a future reference when in doubt.
3.
Unconventional changes or installing of additional devices will lead to the cancellation of any liability by the dealer
or manufacturer!
4.
Remove all articles from the work area, which can be a possible source of danger!
5.
Make sure that the ground for the slab stands is horizontal, stable and has enough load capacity!
6.
Only authorized persons may use the slab stands. Each user must have read and understood this documentation!
7.
Before each use check the basic parts and weld
ing seams for damages! In case of defects don’t use the slab stand;
the use by unauthorized persons must be prevented by suitable measures!
8.
Provide for a stable and anti-skid working ground!
9.
Handle the Stone slabs carefully on the Slab stand.
10. Never walk or stay under suspended load!
11. Keep the working area clean and provide sufficient lighting!
12. While handling the slab stand always wear the appropriate protective clothing, in accordance with the valid rules for
the prevention of accidents! This includes:
•
Working gloves and working clothes in accordance with the valid regulations!
D2
