Operation and Service Instructions RR/QR/Magnum
File: N:\Bedienungsanleitungen aktuell\Bedienungsanleitungen_Fremdsprachlich\Englisch\Plattenständer
Erstellt 12.09.2013
Page 2 of 11
1 Contact
For any further questions and/or individual orders, please contact Wehal-Ludwig Werwein GmbH or the manufacturer directly:
In Deutschland
In Austria
WEHA-Ludwig Werwein GmbH
WEHA Steinbearbeitungsmaschi-
nenvertriebsgesellschaft m. b. H.
Visit us at our
Post Box 13 55
Internet Website:
86331 Königsbrunn / Augsburg
Lange Gasse 17
Wikingerstr. 15
A-1080 Wien
http://WWW:WEHA.COM
86343 Königsbrunn / Augsburg
Telephone: +49 (0) 8231 / 60 07-0
Telephone: +43 (0) 1 / 40 39 340
Telefax: +49 (0) 8231 / 60 07-148
Telefax: +43 (0) 1 / 40 88 762
E-Mail: [email protected]
E-Mail: [email protected]
2 “CE“- Conformity Declaration
EC-Conformity Declaration
98/37/EG
Supplier:
WEHA Ludwig Werwein GmbH
Wikingerstr. 15
D
– 86343 Königsbrunn
Telefon 0049 / (0) 8231 / 60 07 - 0
Telefax 0049 / (0) 8231 / 60 07 - 148
Machine Type:
RR / QR / Magnum
Application:
The Slab Stand is a device to facilitate stocking
of stone slabs.
Machine number:
Signature:
Herr Nagy
We hereby certify that the above mentioned device corresponds to the requirements in accordance with the above guidelines.
3 Explanation of the Symbols and Warning Instructions
The following explanations of the warning symbols appearing on the machine or in the operating instructions should help you to
understand them.
1.1 3.1 Warning Instructions on the Slab Stands
The following warning symbols can appear on the machine respectively unit:
This symbol points out the availability of the related operating instructions and warns the operator to read these
instructions prior to the installation or the commissioning of the machine.
This warning symbol denotes the need of the operator to wear ear-protection and eye goggles.
This mandatory sign obligates the operator of the machine to use and wear safety shoes, protective gloves and
protection helmet.
3.2 Symbols in the Operating Instructions
The following symbols can appear in the operation instructions and are defined accordingly:
