background image

3

English

GENERAL WARNINGS

ENGLISH

•  When using the electrical appliance several safety  standards must be observed :
 

-  do not touch the appliance when hands or feet are wet or damp;

 

-  do not use the appliance in bare feet;

 

-  do not use extensions in rooms where there are showers or baths;

 

-  do not pull on the power cord to disconnect the appliance from the power outlet;

 

-  do not leave the appliance exposed to atmospheric agents (rain, sun, etc.)

 

-  do not allow the appliance to be used by children or incapable people.

•  In case of breakdowns or poor functioning turn off the appliance, and unplug it. Do not attempt any repairs; call 

for specialised technical assistance.

•  Any repairs must be done only by the manufacturer or an authorised assistance centre using exclusively original spare 

parts. If this instruction is not observed the safety of the appliance is compromised and cancels the guarantee.

•  The power cord of the appliance must not be replaced by the user. If the cable is damaged turn the machine off 

and contact only professionally qualified personnel.

•  If you should decide not to use the appliance any longer, unplug it and have it drained of water by qualified per-

sonnel.

•  To guarantee that the machine is efficient for its correct functioning it is indispensable to follow the manufacturer' 

s instructions, having periodical mainte-nance and a check of all the safety devices done by qualified personnel.

•  Do not expose your hands or other body parts in the direction of the coffee delivery spouts or in the direction of 

the steam and hot water delivery terminals. The steam and the water that exit the nozzles can cause burns.

•  When functioning, the steam and water nozzles and the filter-holder cups are overheated and are to be handled 

with care only in the indicated parts.

•  Cups must be placed on the special cup-heating surface only after having been thoroughly dried.
•  The dishes belonging to the machine itself are to be placed on the cup-heater surface. It is incorrect to place any 

other object.

•  Any unauthorised handling of any parts of the machine renders any guarantee null and void.

GUARANTEE

12 months on all components except electrical and electronic components and expendable pieces. 

i

  The espresso coffee machine is for strictly professional use. It is designed for the preparation of hot drinks such as 
tea, cappuccinos and weak, strong and espresso coffee, etc. A range of accessories is available to guarantee practical 
and functional use of the machine.
  If the model has two or more groups it can be used by two or more people simultaneously. This characteristic, together 
with the fact that the machine is able to deliver drinks continuously without any problems, guarantees its intensive use.
  Following are the instructions for correct use of the machine. The various accessories supplied with the appliance 
will also be examined.

P

resentation

The user must have sufficient instructions to correctly operate the machine.  It is recommended not to carry 

out any operations on the machine which can tamper with or alter its functionality. WHEN THE MACHINE 

IS OPERATIVE THE BOILER CONTAINS STEAM AND HOT WATER THAT ARE UNDER PRESSURE.

i

Содержание Polaris EPU































Отзывы: