![WEG Drive Scan Скачать руководство пользователя страница 49](http://html1.mh-extra.com/html/weg/drive-scan/drive-scan_manual_950705049.webp)
6
SETTING THE DRIVE SCAN ON THE MFM
Step 6
Make the settings for the connection to the Wi-Fi internet network, as shown in
Figure 6.6
SSID (Service Set Identifier): Wi-Fi network name;
Default Route: enable/disable the use of the default network route for the destination address
of IP packets;
Security: defines the Wi-Fi network access protection mode to be used:
–
– Open network
–
WPA2-PSK
–
WPA2-Enterprise
–
WEP
EAP Type: defines the network authentication framework to be used:
–
None
–
PEAP-MSCHAPV2
–
PSK
–
PEAP
–
TTLS-MSCHAPV2
Identity: username to authenticate to the Wi-Fi network
Password: password or pin to authenticate to the Wi-Fi network
Figure 6.6:
Wi-Fi network internet configuration
Go to the bottom of the page and click on the “Save Configuration” button (
Figure 6.7
Go to
If the connection is via ethernet port GbE0 (
Figure 6.1
) e avance ao
Figure 6.7:
“Save Configuration” button
Low Voltage Devices | 6-4
Содержание Drive Scan
