WEG Drive Scan, Руководство пользователя

Страница: 50 / 74

6
SETTING THE DRIVE SCAN ON THE MFM
Step 7 A pop-up window will inform you that the configuration has been saved, as shown in Figure 6.8 .
Then wait for the Drive Scan to restart, as shown in Figure 6.9 .
Return to Step 3 .
Figure 6.8: Information about the saving operation
Figure 6.9: Drive Scan resetting
Step 8 The “Internet Status” field should display “Connected”.
Check if the fields ( Figure 6.10 ): “MQTT Status” displays “Disconnected” or “Selected Plant” is
blank or displays the wrong plant:
Click on the “Configure WEG MFM” button
Go to
Step 9
Otherwise (if the fields above are correct):
Go to Step 15
Figure 6.10: Linking of the Drive Scan to the MFM
Low Voltage Devices | 6-5