Worm Gearbox line
6.1
Operating temperature and Oil temperature
The operating temperature is the temperature of the lubricating oil after the temperature stabilization period
at full load. (period after approximately 3 hours of continuous operation)
The external temperature of the housing is approximately 15 °C lower than the operating temperature (oil
temperature).
The operating temperature for WEG-CESTARI gearboxes is a minimum of 18°C and a maximum of 90°C
(under normal operating conditions).
In the first 500 hours it is recommended to observe the quality of the oil, if it is contaminated or with particles
must be replaced.
When changing, the oil must be drained while still hot in order to facilitate draining and cleaning.
In case of unfavorable environmental conditions (high humidity, aggressiveness, dust), the change time can
be reduced, in this case under consultation.
When changing gearboxes, the same oil must be used as indicated on the gearbox nameplate and specified
in this manual.
Do not mix oils of different types and manufacturers. The oil change time is defined as a function of the
operating temperature - see table below
Operating
temperature
Mineral Oil
CLP
Synthetic Oil
CLP HC
Hydrocarbons
Synthetic Oil
CLP PG
Polyglycol
80 °C
5.000 hours
15.000 hours
25.000 hours
85 °C
3.500 hours
10.000 hours
18.000 hours
90 °C
2.500 hours
7.500 hours
13.000 hours
95 °C
--- ---
6.000 hours
8.500 hours
100 °C
--- ---
3.800 hours
6.000 hours
105 °C
--- ---
2.500 hours
4.000 hours
110 °C
--- ---
2.000 hours
3.000 hours
NOTE:
The nameplate informs the type of oil recommended for the gear unit (CLP=Mineral; CLP
HC=Synthetic; CLP PG= Synthetic).
Содержание CESTARI Worm Gearbox line
