WEG AVR-A-OPT-16, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 51

www.weg.net
Automatic Voltage Regulator – AVR-A-OPT-16 | 17
11 DIMENSIONAL DRAWINGS (mm)
12 IDENTIFICATION OF CONNECTION TERMINALS
R;S;T: Sensing Voltage.
AC1;AC2;AC3: Power supply.
S1¹: Connection for pole S1 of the CT.
S2¹: Connection for pole S2 of the CT.
6 e 7: Connection for potentiometer 5K
Ω /3W.
I+, K-: Connection for generator field.
J1: Jumper 50/60Hz.
A+: Analog input voltage –Vdc.
A-: Analog input v Vdc.
13 DIAGRAM FOR TEST WITHOUT GENERATOR
Below is the diagram for regulator connection on the bench where the equipment operation may be verified before connection to
the generator.
Material required:
1 - Small screwdriver;
1 - Incandescent lamp;
1 - Lamp socket;
1 - Bipolar breaker (5A recommended);
1 - Extension cable;
1 - Plug 110V.
NOTE
1. After performance of such steps as per the procedure the equipment must be sent for evaluation by WEG
technical support.
39,0
Front view
Fixing hole detail
181,0
115,0
130,0
147,0
Overview
P1
P2
50Hz
60Hz
300Hz
R S T S1 S2 A- A+ K- I+ AC1 AC2 AC3
36,5
6,0