Barcelona
Pol. Ind. La Valldan
Camí de Garreta, 92
08600 Berga
Barcelona – Spain
T. +34 902 041 563
equipment in order to arrange the hot stones once heated. Always handle
the stones with care when you put them into the water tank or remove
them from it.
3.
Before plugging the equipment, introduce the stones into the water tank
and make sure you add enough water to cover the stone. Use the lid to
close the tank.
4.
Plug the equipment and select either Fahrenheit or Celsius degrees, which
will be shown on the Current temperature display.
5.
Press on/off key to turn on the heater and set the temperature as desired
with (+) and (-) keys and it will be shown on the setting temperature
display.
6.
The equipment is heating while the indication light is on. It will turn off
once the desired temperature is achieved.
7.
Then, pick up the first stone from the water tank with the slotted spoon
provided. Test the temperature of the stone with your finger, and if it is
not too hot, hold it on your hand. When the temperature is warm and you
feel yourself comfortable, you can place it on the patient’s skin.
8.
Once the session is finished, turn the unit off with the on/off key and
unplug it when not in use.
Maintenance and cleaning
Clean the equipment after each session following the next steps.
1.
It is very important to unplug the equipment and let it cool down before
cleaning it.
2.
Carefully pick up the stones with the provided slotted spoon before
removing the water.
3.
Clean the water tank and the equipment lid with soap and cold water.
Rinse it with clean water and dry it with a clean cloth or towel.
4.
Wipe the main unit with a damp cloth or towel. Never immerse it in water
or place it inside a sink to rinse it.
5.
Rinse the stones under cold running water, use antibacterial soap and
warm water to get rid of any oil, cream or remaining lotion on the stones
and rinse them under cold water. Dry them with a lint-free cloth and place
them back into their case.
Troubleshooting
