8
Jump Starting a Vehicle:
Please see your Weego Quick Start Guide for step-by-step procedures on how
to jump your vehicle.
By owning a Weego Jump Starter you have everything you need to jump start
a vehicle - no need to wait for help, Weego to the rescue!
We know you’re excited, but before jumping your vehicle please be sure to
take some precautionary steps:
• Read your vehicle owner’s manual first as the manufacturer may have
specific steps and precautions that pertain to your vehicle.
• Thoroughly follow your Weego Quick Start Guide and review your Weego
Owner’s Manual.
• Be sure to turn off all electronics in your car (radio, lights, etc.) before jump
starting.
• Make sure you are in a dry, well-ventilated area. Never jump start a vehicle in
an enclosed area.
• Remove any moisture from your Weego unit, accessories, and your vehicle’s
battery. NEVER attempt to jump start a vehicle when moisture is present.
• Check that the vehicle’s battery terminals are clean to ensure the best
conductivity.
• Properly identify the vehicle battery’s positive (+, red) and negative (-, black)
terminals before connecting the clamps.
• When using the clamps, DO NOT allow the metal teeth of the black clamp to
touch the metal teeth of the red clamp.
• When using the clamps, DO NOT connect the RED clamp to the vehicle
battery’s negative (-) terminal, or the BLACK clamp to the vehicle battery’s
positive (+) terminal.
• When connecting Weego clamps to the battery terminals, ensure the copper
teeth on each side of the clamp make good contact with the terminal. The
better the connection, the easier it will be to start your vehicle.
NOTE: When adjusting the clamps please be sure to first disconnect your
Weego. This will prevent the occurrence of minor sparks.
General Guidance: Weego Model to Engine Size
Weego Jump Starters can be used on gas and diesel engines as follows:
