WEDGELOCK I-LOCK, Руководство оператора

Страница: 11 / 18

11
NORTH AMERICA
All Wedgelock Couplers are fitted with
an Aluminum Data Plate (FIG 3.0.1).
Information pertains to the product code,
the carrier machine, product serial number,
working load limit (for lifting purposes) and
the maximum operating pressure. If any
of the cells are left blank it means that
the information is non-applicable to this
attachment
3.0 COUPLER IDENTIFICATION
SECTION 3: MAINTENANCE
WARNING: Wedgelock Quick Couplers that incorporate a factory fitted lifting eye
will be labeled and marked with a Working Load Limit (WLL). The lifting eyes are
designed in accordance with BS-2573:Part1. It is highly recommended that a Bow
Type Shackle be used to connect to the lifting eye. See page 13.
3.0 SERVICING SCHEDULE
Maintenance Required Daily Weekly
Check all pin retainers, bolts & nuts for tightness on the quick coupler and
the attachments.
✓
Lubricate all greaseing points – the attachment will have to be removed to
access all grease points.
✓
Check hydraulic hoses and fittings for any leaks or wear – replace
immediately if required.
✓
Check the quick coupler switch audible warning buzzer and lights are
operating properly.
✓
Check the full operation of all the moving parts within the quick coupler –
repair or replace immediately if required.
✓
Check the hydraulic cylinder mounting bolts for tightness – remedy if
required.
✓
Thoroughly clean the quick coupler and ensure there is no material build
up around locking cylinder, wedge or I-Lock™ safety system.
✓
Thoroughly clean the quick coupler and ensure there is no material build
up around locking cylinder, wedge or I-Lock™ safety system.
✓
(Fig 3.0.1)
PRODUCT
MACHINE
CAP.
GET
MAX PRESSURE
SERIAL
WT.
WLL.
www.wedgelockusa.com Made in USA
EXAMPLE
NORTH AMERICA