background image

WEDA W

50 

R

1.Weda Poolcleaner AB and Pool Vacuums

Weda Poolcleaner AB has produced pool vacuums for public pools since the mid-1970´s. Today the  
products are distributed world wide through own subsidiaries and a distributor network.  

The product program consists of fully-automatic or semi-automatic pool vacuums (pool cleaners) for all 
kinds of public pools.

Today’s market puts a great demand on the pool vacuums since pools today are designed and built in 
various shapes and forms and in a wide variety of sizes and depths. Pool types vary from regular swim-
ming pools to wave pools, lazy rivers etc.

Since there is a strong connection between chlorination levels in the pool water and the efficiency of the 
pool vacuuming it is very important to optimise the pool vacuum for each individual pool. This is not only 
based on the pool size but factors like the number of users and environmental issues in and around the 
pool play an important role.

Since there is a common demand to decrease the usage of chlorine in pools Weda strives to design 
better and more flexible pool vacuums so that we can optimize the vacuum for each pool and meet the 
customers’ high demands.

The latest product in the Weda range is the W50 which is the smallest fully-automatic and semi-automatic 
pool vacuum in the Weda range. It is still designed to meet the needs of large public pools with a large 
amount of users. And it includes the Weda reliability and more than 30 years experience from pool-vacuum-
design, usage and servicing.

The automatic function is reached by using the latest laser detection system and the most up-to-date 
PLC technology available. The W50 uses no moving parts for wall detection.

The fully-automatic function is combined with a remote control option that allows for fast and reliable 
movement control all over the pool bottoms.

The W50 is offered in three different basic models:  Beside the W50 R a  standard version version and a “Super 
Auto” version  are available with the possibility to select a number of various cleaning programs. 

We wish you many good years of reliable pool cleaning with your new W50.

Klas Lange, Managing Director 
Weda Poolcleaner AB

Содержание W50 R













Отзывы: