WEBTEC HPM6000, Быстрый старт

Страница: 12 / 44

12
Quick start – measurements using sensors with sensor-ID functionality
NOTICE
The plastic caps protect against dust and splashed water. Be sure that the caps
are always covering any unused ports.
Connecting analogue sensors (for measurement chains with IP54 protection)
If you have purchased your measuring instrument with an input module, connect the ana-
logue sensors (with sensor detection capabilities) to the analogue inputs IN1 to IN3 as
shown in the illustration. Similarly, connect analogue sensors to the analogue inputs IN6
– IN8 on the second optional input module.
IN 1 IN 2 IN 3
A
IN 6 IN 7 IN 8
B
C
D
A Analogue ports
IN1 – IN3
B Analogue ports
IN6 – IN8
C Connection cable
D Analogue sensor