5
Need help?
Customer Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
www.weBoost.com
ENGLISH
4. Insert the Outside Antenna into the
cradle.
Window faces general
direction of cell tower
5. Connect the supplied coax cable to
the antenna lead cable on the Outside
Antenna.
6. Route the cable as desired to the
location of the Home 4G. If you need
to connect both coax cables, use the
Cable Connector provided.
7. Connect the coax cable to the Home 4G.
Connect the Desktop Antenna to the
Home 4G. For instructions on install and
Desktop Antenna placement refer to
page 9.
Quick Install - Inside Window
Mount Option
Additional installation options on pg. 6-8
Find the Strongest Cellular Signal
(See page 4 for suggested methods.)
Ready to Install Inside Window Mount
1. Select a location on the inside of a
window as high as possible and at
least 20 feet from where the Home 4G
will be located. Note that this distance
typically requires the window mount
to be in a different room from where
you will locate the Home 4G and
Desktop Antenna. The window should
face roughly in the direction of the
strongest cellular signal (see section
headed “Find the Strongest Cellular
Signal” on page 4).
Window faces general
direction of cell tower
2. Clean the area on the glass with the
alcohol prep pad included in Packet C.
3. Insert the suction cups included in
Packet C into the holes on the Outside
Antenna cradle using a twisting motion.
Press the suction cups onto the
window in the desired location.
twist thr
ough
twist thr
ough
