IV. Specifications of WebEye A10
V. Reference Facts
1. Access Condition
•
Audio quality depends on upload rate of Internet, Round Trip time between user and
WebEye, and Packet loss degree.
•
When WebEye is connected to ADSL/ISDN/PPP or connection state is bad, audio may
be cut off or may not be operated normally regardless of video transmission quality.
2. H/W, S/W Configuration
•
When volume is low, control master volume and wave volume at ‘control panel’ in PC,
and configure volume at WebEye Administration Page. (In needed, use external
amplification speaker.)
•
When you utilize A10 for audio transmission, use external microphone for it.
Operating S/W
O/S: Windows 98/ME/NT/2000
Web browser: MS Internet Explorer (Version 4.0 or above)
Software: WebEye Audio S/W (Active-X Control from WebEye
E10/E104)
Audio Compression
Compression type: TrueSpeech 8.5 Engine
H/W Codec: CT8022 (DSP inside TrueSpeech Codec)
Sample dimension: A- law 8 bit
Sampling rate: 8000 Hz
Transfer rate: 8 Kbps
Input (Microphone)
Impedance: Max. 2.2K
Ω
Sensitivity: -36dB ~ -40dB
Standard power supply: 4.5V DC
External
Communication
Serial: RS232C, 38400bps
Cable: 8Pin RJ -45 Modular Jack to D-Sub 15pin
Accessable Clients at the same time: Max. 50 (in using LAN)
Power supply
DC 12V, 1.0A
Mechanical
Dimension: 94mm
x
81mm
x
28mm
Weight: 180g (without adaptor)
Usable Accessary
External Mic.(Condensor Mic.)
