WebGate MD1600E, Инструкция по установке и эксплуатации

Страница: 75 / 111

Install&User Manual
74
6.4.1.3 AGC (Auto Gain Control)
AGC is the function to control the range of video signal input from carame connected.
Configure Enable/Disable using directional key or mouse wheel.
6.4.1.4 Brightness/Contrast
It can control Brightness and Contrast of video. After press [ENTER], use left/right button or
mouse wheel to set the value wanted from each “–9” to “+9”.
.
6.4.2 Monitor Setup
Main monitor provides all function which DVR supports and with spot monitor can use single
channel conversion.
Covert channel
With Covert menu, user can covert the channel in Live/Playback mode
In Covert menu, all channel list will be shown and press [Enter] buttion and click mouse to tick
the channel. Checked channel will not show the video in Live/Playback.
User sequence configuration
User sequence can be edited. There are 16 user sequence mode and its interval is from 1 to
60seconds.
Multi mode
MD1600E has 3 predefined screen modes. 4E(4channels), 9B(basic 7 channels and additional
2 channels),0A(10 channels). In case of MD800E, it can use only 4E(4channels) and MD400E
doesn’t provide multi mode.