WebGate MD1600E, Инструкция по установке и эксплуатации

Страница: 26 / 111

Install&User Manual
25
2.4 Connecting and configuring DIO ports
2.4.1 Wire Handling
When connecting a wire to a terminal block, follow the instruction below. Not the different types
of wire that can be used.
- Standard wire : Pie off the wiring cover 8~10mm and solder it. Wire gage should AWG
22~26.
- Sold wire : Peel off the wiring cover 8~10mm and solder it.Wire gage should be AWG 20~26
2.4.2 Inserting & removing wire
To insert & remove wire in Terminal Block, use a screwdriver in the diagram to the below;
2.4.3 Connecting and configuring sensor
2.4.3.1 Specification
In order to run sensor input DVR normally, the following conditions are required.
Spec
Input Ch 16EA Transistor input(MD800E : 8EA, MD400E : 4EA)
Input type N.C, N.O supprt
Supported sensor Dry contact sensor
Way of connecting Connecting the trimmed wire to terminal block