25
FUNCTION SETUP > PRESET SETUP
OSD -
1
2
3
<
FUNCTION SETUP
>
====================================================
<
PRESET SETUP
>
<
SCAN SETUP
>
<
PATTERN SETUP
>
<
GROUP SETUP
>
BACK
EXIT
<
PRESET SETUP
>
====================================================
PRESET NUMBER
<
EDIT SCENE
>
CLEAR PRESET
ALARM OUT
BACK
EXIT
1
CANCEL
----
<
EDIT SCENE
>
====================================================
MOVE TO TARGET POSITION
[NEAR:SELECT/FAR:CANCEL]
3
Select ‘<PRESET SETUP>’
and press the ‘NEAR’ key
After define the ‘PRESET NUMBER’,
select ‘<EDIT SCENE>’
and press the ‘NEAR’ key
FUNCTION SETUP
Configure 4 special functions with this menu.
1
PRESET SETUP
255 presets from the number 1 to 255 can be assigned excluding
preset 95, 131~134, 141~148, 151~158 reserved for menu.
PRESET NUMBER
Selects the preset number to edit.
<EDIT SCENE>
Define the current preset scene position(i.e. PTZ).
CLEAR PRESET
Deletes current preset data.
ALARM OUT
State of four alarm outputs can be freely controlled in conjunction
with preset run. The character ‘ - ’ means off state and the number
representing each bit means on.
Ex) If it is set to be ‘ - 2 3 - ‘, output relay 2, 3 will be on and 1, 4 will be
be off, when you run this preset.
1 ~ 255 (95 excepted)
CANCEL / OK
- - - - / 1234
EDIT SCENE
1) By PTZ controling, move camera to desired position.
2) By pressing the ‘NEAR’ key, the save current PTZ data.
3) If you want cancel the editing, press the ‘FAR’ key.
3
2
