34
SYSTEM SETUP
OSD -
<
DATE/TIME
>
====================================================
DATE(D/M/Y) 11/SET/2011(SAT)
TIME(H:M:S) 12:12:12
1
<
SYSTEM SETUP
>
====================================================
HD-SDI 192Ox1O8Oi6O
CLEAR ALL DATA CANCEL
AUTO CALIBRATION CANCEL
<
DATE/TIME
>
BACK
EXIT
3
HD-SDI
Select the resolution of HD-SDI.
CLEAR ALL DATA
Deletes all configuration data such as display, camera, motion setup
and so on.
AUTO CALIBRATION
If the camera is continuously subjected to very high temperature (over
50°C or 122°F) environment for a long time, it is possible for the camera
to lose focus. As a result, you will get blurry image. In this case, it is
recommended to turn on auto calibration. If you execute ‘AUTO
CALIBRATION’, camera will calibrate its focus and PTZ at every 24 hours.
<DATE/TIME>
Adjust the date and time.
1280x720p50 / 1280x720p60 / 1920x1080i50 /
1920x1080i60 / 1920x1080p25 / 1920x1080p30
CANCEL / OK
CANCEL / OK
SYSTEM SETUP
1
<
DATE/TIME
>
====================================================
DATE(D/M/Y) 11/SET/2011(SAT)
TIME(H:M:S) 12:12:12
BACK
EXIT
2
1
DATE/TIME - Adjust the Date
The date is displayed with "Date/Month/Year/Day" format and
you can change this value.
1. To place the cursor on the date marked as below, press near
key.
2. Move joystick Left/Right to adjust month, year, day.
3. Move joystick Up/Down to select the value of each item.
4. By pressing near key, save current setting.
2
<
DATE/TIME
>
====================================================
DATE(D/M/Y) 11/SET/2011(SAT)
TIME(H:M:S) 12:12:12
Press the ‘NEAR’ key