manualshive.com logo in svg

Weber Summit Gold D 42080, Руководство пользователя, Страница: 44 / 50

Поделиться
Скачать
Weber Summit Gold D 42080 Скачать руководство пользователя страница 44

44

Burners burn with a yellow or
orange flame, in conjunction with
the smell of gas.

Inspect Spider / Insect Screens for
possible obstructions. (Blockage of
holes.)

Clean Spider / Insect Screens. (See
Section “Annual Maintenance”)

Burner does not light, or flame is
low in HIGH position.

Is LP fuel low or empty?

Is fuel hose bent or kinked?

Does the Left burner light with a
match?

Refill LP cylinder.

Straighten fuel hose.

If you can light the Left burner with
a match, then check the Crossover

®

ignition system.

Experiencing flare-ups:

 

CAUTION: Do not line the

bottom tray with aluminum foil.

Are you preheating barbecue in the
prescribed manner?

Are the cooking grates and
Flavorizer

®

 bars heavily coated with

burned-on grease?

Is the bottom tray “dirty” and not
allowing grease to flow into catch
pan?

All burners on high for 10 to 15
minutes for preheating.

Clean thoroughly. (See Section
“Cleaning”)

Clean bottom tray

Burner flame pattern is erratic.
Flame is low when burner is on
HIGH. Flames do not run the
whole length of the burner tube.

Are burners clean?

Clean burners. (See Section
“Maintenance”.)

Inside of lid appears to be
“peeling.” (Resembles paint
peeling.)

The lid is porcelain-on-steel, not
paint. It cannot “peel”. What you are
seeking is baked on grease that has
turned to carbon and is flaking off.

THIS IS NOT A DEFECT.

Clean thoroughly. (See Section
“Cleaning”.)

If problems cannot be corrected by using these methods, please contact the Customer
Service Representative in your region using the contact information sheet provided with
your manual.

Problem

Check

Cure

Troubleshooting

Содержание Summit Gold D 42080



















































Отзывы:

Нет отзывов