manualshive.com logo in svg

Weber Summit Gold D 42080, Руководство пользователя, Страница: 36 / 50

Поделиться
Скачать
Weber Summit Gold D 42080 Скачать руководство пользователя страница 36

36

Operating Instructions

Side Burner Lighting Instructions

 

DANGER

Failure to open the lid while igniting the side
burner, or not waiting 5 minutes to allow the
gas to clear if the side burner does not light,
may result in an explosive flame-up which can
cause serious bodily injury or death.

Lighting only the side burner.

1) Open the side burner lid.
2) Check that the side burner valve is turned OFF. (Push

each knob down and turn clockwise to ensure they are
in the off position.), and all main burner control valves
are OFF (push down and turn clockwise).

3) Turn the LP tank valve on (turn anti-clockwise).
4) Push down and turn the side burner control valve to

START/HI.

5) Push igniter button and hold until burner ignites. You

will hear the igniter sparking.

 

CAUTION: Side burner flame may be difficult to see

on a bright sunny day.

2, 4

1

2

1

 

WARNING: If the side burner does not light:

1) Turn OFF the side burner control valve.
2) Wait 5 minutes to let the gas clear before you

try again or try to light with a match.

Lighting the side burner if the main burners are lit.

1) Open the side burner lid.
2) Push down and turn the side burner control to 

START/

HI.

3) Push igniter button and hold until burner ignites. You will

hear the igniter sparking

 

CAUTION: Side burner flame may be difficult to see

on a bright sunny day.

 

WARNING: If the side burner does not light:

1) Turn OFF the side burner control valve.
2) Wait 5 minutes to let the gas clear before you

try again or try to light with a match.

Содержание Summit Gold D 42080



















































Отзывы:

Нет отзывов