&%
CEB5?8@
6;86>
FB?HG<BA
Rotisserie burner does not light.
Did you hold the burner control knob in and hold in for 20 seconds
until after burner ignited?
Try to relight burner by holding burner control knob in and continue
holding in until 20 seconds after burner has ignited.
Did you wait to see the entire ceramic surface become alight
before counting 20 seconds?
When relighting burner by holding burner control knob in, wait to
see the entire ceramic surface become alight before counting 20
seconds?
Did you repeatedly use the snap ignition until the burner ignited?
After waiting five minutes for gas to clear, try repeatedly using
the snap igniter until the burner ignites (refer to “ROTISSERIE
BURNER IGNITION & USAGE”).
Does the igniter work (Do you see a spark when you repeatedly
use the snap igniter)?
Try manually lighting the burner (refer to “ROTISSERIE BURNER
MANUAL IGNITION”). Call customer service.
General Symptoms:
Burner does not light. -or- Burner
has a small flickering flame.
The excess flow safety device, which is part of the barbecue to
cylinder connection, may have activated.
To reset the excess flow safety device turn all burner control knobs
and the cylinder valve to OFF. Disconnect the regulator from the
cylinder. Turn burner control knobs to START/HI. Wait at least 1
minute. Turn burner control knobs to OFF. Reconnect the regulator
to the cylinder. Turn cylinder valve on slowly. Refer to “MAIN
BURNER IGNITION”.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
web site. Log onto www.weber.com
®
.
F84EFG4G<BA
GEBH5?8F;BBG<A:
CEB5?8@
6;86>
FB?HG<BA
Burners burn with a yellow or
orange flame, in conjunction with
the smell of gas (This is normal for
the burner lighting tube).
Sear Station
®
burner does not light.
Inspect Spider/Insect Screens for possible obstructions. (Blockage
of holes.)
Clean Spider/Insect Screens.
(See “ANNUAL MAINTENANCE” section)
%JEZPVJHOJUFUIFUXPBEKBDFOUNBJOCVSOFST 4FFi4&"3
STATION
®
IGNITION & USAGE” instructions for safe lighting
procedure)
7FSJGZBEKBDFOUNBJOCVSOFSJHOJUJPOCZWJTVBMJOTQFDUJPOPGBGMBNF
D
WARNING: If ignition does not occur in 5
seconds, turn burner control OFF, wait 5
minutes to let the gas clear before you try
again.
Does Burner light with a match?
If you can light Burner with a match, then check the Crossover
®
Channel on the sear burner.
(See “MAINTENANCE” for burner removal and cleaning
procedure.)
Does the igniter work (Do you see a spark when you repeatedly
use the snap igniter?
Try manually lighting the burner (refer to “SEAR STATION
®
IGNITION & USAGE”). Call customer service.
General Symptoms:
Burner does not light. -or-
Burner has a small flickering flame.
The excess flow safety device, which is part of the barbecue to
cylinder connection, may have activated.
To reset the excess flow safety device turn all burner control knobs
and the cylinder valve to OFF. Disconnect the regulator from the
cylinder. Turn burner control knobs to START/HI. Wait at least 1
minute. Turn burner control knobs to OFF. Reconnect the regulator
to the cylinder. Turn cylinder valve on slowly. Refer to “MAIN
BURNER IGNITION”.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
web site. Log onto www.weber.com
®
.
CEB5?8@
6;86>
FB?HG<BA
Weber Grill Out™ Handle Light
does not light.
Are the batteries old?
Replace batteries.
Are the batteries installed correctly?
Refer to assembly illustration.
Is the lid in the up position with the power button ON?
Light will activate when lid is open.
Is the Weber Grill Out™ Handle Light activated?
Press the power button.
Is the Weber Grill Out™ Handle Light positioned correctly on the
handle?
"EKVTUQPTJUJPO SFGFSUPBTTFNCMZJMMVTUSBUJPO
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
web site. Log onto www.weber.com
®
.
:E<??BHG;4A7?8?<:;GGEBH5?8F;BBG<A:
EBG<FF8E<8GEBH5?8F;BBG<A:
