WWW.WebeR.com
®
3
bUILT-IN cUToUT DImeNSIoNS
“IsLAnd” sTruCTurE ConfIGurATIon oPTIons
There are several configuration options for the grill and gas supply access of your Island
structure.
The 3 common options (A, B, C) are illustrated in the “ ‘Island’ Structure Configuration
Options” table.
◆
buILT-In sTruCTurE CuTouT dImEnsIons
All dimensions are to finished surfaces.
m
wArnInG: All countertop finished surfaces must be
constructed of a noncombustible material.
◆
bUILT-IN cUToUT GeNeRAL DImeNSIoNS
1
2
3
460
660
ToLeRANceS
1
34" (864 mm)
42" (1067 mm)
±1/4" (6 mm)
2
36" (914 mm)
36" (914 mm)
max
3
24 5/16" (618 mm)
24 5/16" (618 mm)
±1/4" (6 mm)
cLeARANceS
1
2
1
1
1
24" (610 mm) any surface
2
27" (686 mm) minimum for lid clearance
LoCATInG Your GrILL
When determining a suitable location for your Summit
®
gas grill installation, give
attention to concerns such as exposure to wind, proximity to traffic paths, and keeping
any gas supply lines as short as possible. Never locate the Summit
®
gas grill in a
garage, breezeway, shed, under an unprotected overhang, or other enclosed area.
Locate the grill and structure so there is enough room to safely evacuate the area in
case of a fire.
CLEArAnCE from surfACEs or sTruCTurEs
m
wArnInG: Clearance from any surface or structure is 24"
(610 mm) from the back and sides of the grill. refer to
“TYPICAL GAs suPPLY InsTALLATIon” before starting
installation.
m
wArnInG: The structure, “island”, countertops, and
adjacent work areas for the built-in grill installation must be
built from noncombustible materials only.
NOTE: If you have questions on what materials are considered noncombustible, contact
your local building materials supplier or fire department.
◆
“ISLAND” STRUcTURe coNFIGURATIoN oPTIoN
1
2
2
2
1
1
C
B
A
1
Summit
®
4-burner/6-burner grill
2
Gas supply