Weber SRV 300, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 24

15
Maintenance overview
Maintenance interval Maintenance point Maintenance activity
After the first
10 operating hours
Engine - Change the engine oil
- Re-tighten all accessible
threaded connections
Every 50 operating hours /
every 6 months
Air filter - Clean air filter insert, check for
damage, replace if necessary
Engine - Change the engine oil
- Change the fuel filter
As necessary - Change grease in tamping
system
Every 50 operating hours
Lubricating points - Lubricate with bearing grease
Every 100 operating hours
every year
Engine - Adjust valve play
The regulations of the engine manufacturer must be complied with in addition to the above
maintenance overview!
Work must be carried out using regulation tools, and the operating and maintenance manual
must be complied with for all work.
All maintenance work: select collection vessels large enough to prevent oil from spilling onto the
ground. Dispose of waste oil in an environmentally friendly manner (regulation on waste oils).
Dispose of oils, greases, cloths soaked in oil, and replaced parts with oil on them in an envi -
ronmentally friendly manner.
If lubricating oils and fuel come into contact with skin, they can cause skin cancer. Upon contact
with the skin, clean affected skin with suitable cleaning agent without delay.
If accessible during maintenance, check the condition and stability of all screws.