Weber Markoprint X4JET Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 177

Weber Markoprint X4JET Скачать руководство пользователя страница 63

Installation and initial operation

72800115 Markoprint X4JET

Seite 63 von 177

GB

Fig. 30: Photo sensor installation

5.

Connect the light barrier cable to the connector of the photo sensor and tighten.

6.

Using the two screws supplied, mount the light barrier to the print head (Fig. 25) in such a
way that the product to be printed passes the light barrier before passing the print head.
The photo cell should have an unlimited view to the product (send- and reception diode).
Tighten the screws only to the extent that the plastic enclosure will not be damaged.
Alternatively,

another

sensor

may

be

used.

Observe the direction of movement of the conveyor belt!

7.

Mount optional rotary encoder on production line.

8.

Connect the rotary encoder cable to the rotary encoder connector and fasten.

9.

If necessary, mount an additional screen to protect the print head.

10.

Check data of the public power supply with the technical data of the power supply.



Chapter 0, Page 19 Take the electrical connection by correlation only!

11.

Remove the protective foil from the nozzle plate and insert the ink cartridge in the holder.



Chapter

Insert / remove LX ink cartridge, Page 64

To avoid faults caused by potential differences, the controller must be electrically
connected to the conveyor belt.

12.

When laying the cables, ensure that cables are not tripping hazards and do not lay them

around corners and sharp edges. Avoid abrasive surfaces.

Photo

sensor

Conveyor
direction

«
...
61
62
63
64
65
...
»

Содержание Markoprint X4JET


















































































































































































Отзывы:

Нет отзывов