Weber Markoprint X4JET Скачать руководство пользователя страница 140 | Manualshive

Страница: 140 / 177

Weber Markoprint X4JET Скачать руководство пользователя страница 140

Appendix

72800115 Markoprint X4JET

Seite 140 von 177

GB

Boot loader-Update

The system may under no circumstances be switched off during the boot loader
update.
If the update cannot be completed, do not restart the system.
To replace the boot loader the system must then be send to the manufacturer.

A boot loader update is performed as follows:

The Boot loader version will be shown in the start screen down right, during the
Bluhm/Weber logo run through the screen.

1.

Switch on the system and keep the iLOGIK button pressed when the start logo
(Bluhm/Weber, Markoprint X4JET) appears.

2.

The following then appears on the screen:

Prg: 0 PV1.0xx



current program version

GA.: 0GV0.032



current gate array version

Stick?

3.

Insert the USB stick with the new version.

The following then appears on the display:
Prg: 57 PV1.0xx



current program versions

GA.: 14 GV0.032



current gate array versions

Start?

4.

By briefly pressing the iLOGIK button the new boot loader version is copied to the internal
memory.

5.

The green power LED lights up during the copying process.

6.

Wait until the end of the copying process, with the power LED lit up and the sensor LED
displayed in green!

If this process is prematurely interrupted the system will no longer start!
The system must be send to the manufacturer.

7.

Restart the system by switching off the voltage and switching on again.

«
...
138
139
140
141
142
...
»

Содержание Markoprint X4JET


















































































































































































Отзывы:

Нет отзывов