10
Assembly
Tools needed
Screwdrivers, regular and
Phillips
Hammer
One 7/16 inch, 11/16, and 3/4 inch or two adjustable
wrenches
Pliers
Tape Measure
Pencil
Electric drill
Supplies needed
You will need a soap and water solution to check for gas
leaks. (See Step "Check for gas leaks.")
Note - The hardware size of nuts, bolts, and screws is
given. For example "1/4-20 x 2 inch bolt" means a bolt
1/4 inch in diameter with 20 threads to the inch, 2 inches
long. On a small screw for example, "6-32 x 1/2 inch
screw" means a number 6 screw, with 32 threads to the
inch, 1/2 inch long.
Step 1
Check package contents
Cooking box
(assembly)
Lid
(assembly)
Bottom tray
Control panel
Work table
Gas supply line
(with the flare fitting
loosely attached
for shipping purposes)
While we give much attention to our products,
unfortunately an occasional error may occur. If a part is
missing, do not go back to the store. Call the Weber
Customer Service Center toll free 1-800-446-1071 to
receive immediate assistance. Have your owner’s
manual and serial number of the barbecue available for
reference.
®
®
®
®
®
®
®
®
