Weber mt SM 57-2, Руководство по эксплуатации и техническому обслуживанию

Страница: 14 / 24

14
After the engine has warmed up, slide the choke lever to
the right (open).
Slowly tighten the handle (1) of the reversing starter (2) until
resistance is noticeable.
Allow the handle (1) to glide back into the initial position, and
then forcefully and completely pull it through with both hands.
1
2
Cutting
Once the drive motor is running at the operating speed,
actuate the foot pedal for the height adjustment and lower
joint cutter to the preset cutting depth.
Open the stop cock (1) at the water sprinkling system.
Enough water should always be supplied for cutting. The
water is only supplied to bind with the dust.
Align the pointer (1) to the marked cut line.
Risk of getting cut on the rotating cutting disk.
1
1