Weber mt SM 57-2, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 24

12
Max.
Min.
1
Transport
Attach the round sling (1) to the handrail rod as shown. Lift
the machine onto the means of transport selected.
Only use lifting machines with a minimum bearing ca -
pacity of 100 kg.
Open and remove tank cap (1), check level, fill up to lower
edge of the filler neck.
The correct oil level is between the min. and max. marks.
Check the engine oil level
Pull the oil dipstick (1) out of the crankcase.
Check the fuel level
Insert the oil dip stick in the oil filler neck, however do
not screw it in.
Check water level
Open and remove tank cap (1), check level, if required fill up
to lower edge of the filler neck.
Activities prior to starting work
When transporting the joint cutter on a vehicle, secure
it with suitable restraints.
For work at the fuel system, have a suitable fire-extin-
guishing agent at the ready.
Fire, naked light, and smoking is forbidden!
1
1
1
Do not step under suspended loads.