![Weber mt CR 9 CCD 2.0 Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/weber-mt/cr-9-ccd-2-0/cr-9-ccd-2-0_operating-and-maintenance-manual_949168020.webp)
20
CR 9 CCD 2.0
1
1
1
1
2
2
1
2
Changing the engine oil filter
Drain engine oil.
Remove the cover cap (1)
.
When working in the area of the engine compartment
there is a danger of being burnt!
Danger of scalding due to hot oil.
Pay attention to the “TOP” marking on the oil filter!
Change the fuel filter
Pull the fuel line (2) off the fuel filter (1) on both sides.
Replace the filter with a new filter element.
If lubricating oils and fuel come into contact with skin,
they can cause skin cancer. Upon contact with the skin,
clean affected skin with suitable cleaning agent without
delay.
Clean / change air filter cartridge
Unscrew the air filter cover (1).
Remove the air filter insert (1) from the air filter enclosure.
Clean air filter insert as specified by the engine manufacturer
if there is damage or if it is extremely dirty.
Dispose of oils, greases, cloths soaked in oil, and
replaced parts with oil on them in an environmentally
friendly manner.
Checking the battery / acid level
Battery acid is extremely caustic. Protect hands and eyes
with suitable protective goggles and gloves.
Remove the cover cap (1).
Check the acid level; if it is too low top off with distilled water
until the max. mark is reached.
Replace oil filter (2) with a new element.
After replacing the filter element seal the filter enclosure with
the cover cap (1).