18
CR 9 CCD 2.0
Maintenance overview
Maintenance interval
Maintenance point Maintenance activity
After the first
25 operating hours
Engine
– Change the engine oil
– Re-tighten all accessible
threaded connections
Every 8 operating
hours / daily
Air filter
– Clean air filter insert,
check for damage,
replace if necessary
Every 150 operating
hours / every 6 months
Engine
Battery
Transmission
– Change the engine oil
– Change the fuel filter
– Change oil filter
– Check acid level,
fill up with distilled
water if necessary
– Check oil level
Every 150 operating
hours / every year
Transmission
– Change oil
– Change oil
Exciter
The regulations of the engine manufacturer must be complied with in addition to the above main-
tenance overview!
If lubricating oils and fuel come into contact with skin, they can cause skin cancer. Upon contact
with the skin, clean affected skin with suitable cleaning agent without delay.
If accessible during maintenance, check the condition and stability of all screws.
Work must be carried out using regulation tools, and the operating and maintenance manual must
be complied with for all work.
All maintenance work: Select a collection vessel that is large enough to prevent oil from spilling onto
the ground. Dispose of waste oil in an environmentally friendly manner (regulation on waste oils).
Dispose of oils, greases, cloths soaked in oil, and replaced parts with oil on them in an environ-
mentally friendly manner.
