Weber mt CR 3-II Hd, Руководство по эксплуатации и техническому обслуживанию

Страница: 16 / 28

16 CR 3-II Hd
1
2
3
5
4
Starting
Place the short-circuit button (3) in position 1.
Checking the hydraulic oil level
Check the hydraulic oil level when the machine is at operating
temperature. The guide bar must be in the transport position –
i.e. folded up. The correct oil level is reached when the oil is in
the middle of the view glass.
Mounting the attachment plates
Tighten the screws (1) of the attachment plates (2) with
a torque of 310 Nm.
Installing the protective mat
Fasten the protective mat with holder, screws, spring-lock
washers and nuts on the base plate front and rear.
Ensure that the protective mat rests under the base plate.
Slide the lever of the fuel cock (4) to the right.
Slide the choke lever (5) to the left (close).
After the engine has warmed up, slide the choke lever (5)
to the right (open).