18
B 1008_2-0320
1
2
Compacting
WARNING
There is a crushing hazard under the tamping foot from
the movement of the tamper during compacting.
Wear the personal protective equipment.
Only guide the tamper in the grip area of the manual
guidance rod.
CAUTION
There is a crushing hazard between the tamper and the wall
during work in close proximity to walls.
Use extra caution when working close to obstacles.
CAUTION
If guided incorrectly, the tamper may tip over during operation.
There is a crushing hazard.
Guide the tamper safely with both hands in the grip area of
the manual guidance rod.
Start the engine.
Select the desired speed at the gas lever (full throttle (1)
or reduced (2) speed).
Guide the tamper with both hands on the manual guidance
rod.
Switching off the engine
Allow the engine to cool down at idle speed for a few
minutes (“ON” position).
To switch the machine off, set the gas lever to
the “Stop” position.
The engine is switched off, and the fuel valve is closed.
ATTENTION
Danger of material damage if the machine is guided improperly.
Pulling the machine back against its intended direction of
movement will overload and possibly break the guide cylinder.
Never pull the tamper back against its intended direction of
movement.
