CF 3-II H
17
1
2
3
2
1
4
Maintenance work
Change the engine oil
Remove the oil dip stick (1).
Screw the oil drain pipe (2) onto the drain valve and drain
the oil.
Only drain engine oil when at operating temperature.
After emptying completely, unscrew the oil drain pipe
from the drain valve and fill with oil in accordance with
the specification.
Risk of scalding due to hot oil.
When working in the area of the engine compartment
there is a danger of being burnt
!
If lubricating oils and fuel come into contact with skin, they
can cause skin cancer. Upon contact with the skin, clean
affected skin with suitable cleaning agent without delay.
Dispose of oils, greases, cloths soaked in oil, and
replaced parts with oil on them in an environmentally
friendly manner.
Clean the engine oil filter
Drain engine oil.
Loosen the screw (1) approximately 5 revolutions.
Pull the oil filter (2) out of the motor compartment.
Blow out the oil filter (2) from inside to outside
with compressed air.
Prior to tightening the screws ensure that the tension
springs rest on the oil filter with both ends (4).
Lightly oil the sealing rings (3) on both sides of the oil filter.
Check sealing rings (3) for damage and firm seat, replace
the oil filter if there is damage.
Press the oil filter into the crankcase as far as it will go.
Содержание 0100321
