Weber mt 0100321, Руководство по эксплуатации и техническому обслуживанию

Страница: 16 / 24

16 CF 3-II H
The regulations of the engine manufacturer must be complied with in addition to the above main-
tenance overview!
Tasks must be executed using proper tools, and the safety instructions of this operating and
maintenance manual must be complied with for all tasks.
All maintenance work: select collection vessels large enough to prevent oil from spilling onto the
ground. Dispose of waste oil in an environmentally friendly manner (regulation on waste oils).
Dispose of oils, greases, cloths soaked in oil, and replaced parts with oil on them in an environ-
mentally friendly manner.
If lubricating oils and fuel come into contact with skin, they can cause skin cancer. Upon contact
with the skin, clean affected skin with suitable cleaning agent without delay.
If accessible during maintenance, check the condition and stability of all screws.
Maintenance overview
Maintenance interval Maintenance point Maintenance activity
after the first
25 operating hours
Engine – Change the engine oil
– Check valve play;
adjust if necessary
– Re-tighten all accessible
threaded connections
every 8 operating hours /
daily
Air filter – Clean air filter insert,
check for damage,
replace if necessary
every 150 operating
hours / every 6 months
Engine – Change the engine oil
– Change the fuel filter
– Change the oil filter
every 150 operating
hours / every year
Gearshift
Exciter
– Change oil
– Change oil
every 250 operating
hours
Engine – Check valve play;
adjust if necessary