Webb WER18SP, Руководство оператора, Страница: 6 / 24

Re-seat the lever assembly back into the main handle.
INSTALL ATTACHMENTS
Your lawnmower was shipped ready to be used as a rear bag mower.
The mower has three different operating modes.
1. Collecting:
• Fit the grassbox by lifting the rear flap on the mower and hook the front of the box to the shaft on the
mower.
• Lower the flap to lock the grassbox in position.
• When the box is full, the grass will be visible through the viewing window in the top of the box.
• Stop the engine before emptying the grassbox.
2. Rear Discharge:
• With the grassbox removed and the rear flap in the down position, the mower will cut and discharge the
grass from the rear of the machine.
3. Mulching:
• Fit the mulch plug to the rear discharge opening of the mower and close the rear flap.
• The mower will now recycle the chopped grass into the lawn surface.
• To mulch efficiently only cut one third of the length of the grass.
SET UP YOUR MOWER
IMPORTANT : Unfold the handle carefully so
as not to pinch or damage the control cables.
1. Depress the Operator Presence Control Bar
(OPC) and raise the handles until the lower handle
section locks into place at the mowing position.
2. With the Operator Presence Control Bar still
depressed raise the upper handle section into place
on the lower handle and tighten both handle knobs.
5