Webb 1938323001 Скачать руководство пользователя страница 39

 Warranty

(c) Neither GJ Handy & Co Ltd nor any company affi  liated with GJ Handy & Co Ltd shall be liable in any event or 

manner whatsoever for incidental or consequential damages or injuries, including, but not limited to, loss of crops, 

loss of profi t, out of pocket expenses or profi ts, rental of substitute equipment or other commercial losses.

5. General

(a) Most warrantable failures show up within the fi rst few weeks of use. These failures are usually straightforward 

and warranty assessment is relatively easy.

(b) Failures relating to cutter decks and belts need careful investigation, as the cause may not always be 

straightforward. Look for damage to blades and pulleys especially when the cutter belt or blade boss have snapped 

or cracked as this could be due to impact damage.

(c) Customers should always refer to the operator/instruction manual when any disputed problem arises, you will 

fi nd most areas covered within the manual.

Protecting your machine

Maintenance

Regular maintenance of your Webb machine is essential to ensure it operates, safely, effi  ciently and therefore 

reducing the environmental impact.

It is the owner’s responsibility to ensure that their Webb machine is maintained at specifi c intervals. Any approved 

Webb service dealer can undertake a service, which are specialised in our products and will be aware of your 

particular machine and any technical updates which will save valuable time & money.

If you are using your machine in dry, dusty or high temperatures, you will need to service the machine more 

regularly.

Fuel (if applicable)

Due to ongoing eff orts by fuel companies to reduce emissions, unleaded petrol will oxidize & deteriorate in storage 

overtime, leaving residue from detergent components.

Fuel deterioration problems may occur when petrol is stored for over 30 days. If you are planning to store fuel for 

over 30 days, we recommend you add Handy Parts Sure-Start fuel stabilizer to fresh fuel after purchasing. Sure-

Start cannot reconstitute stale fuel.

Storage

When storing your machine for an extended period, we do recommend that you follow the instructions of engine 

instruction manual.

Always store the fuel in a clean, approved and sealed container. If the container is steel, ensure it is not corroded.

If the container is not fi lled to its recommended capacity, air can accelerate fuel deterioration.

Always store fuel away from direct sunlight, in a dark, cool environment.

Your servicing Webb approved dealer will stamp & date the below relevant sections, when the correct service actions 

have been completed. 

PLEASE ENSURE THE SERVICE BOOK IS AVAILABLE FOR THE DEALER, DURING SERVICE WORK.

1st Service

This must be stamped by an approved service dealer to 

qualify for a free second year warranty.

(Excluding the Webb Electric Handheld machines)

24 Months

Date

Date

36 Months

12 Months

Date

INSTRUCTION MANUAL

SERVICE BOOK

Содержание 1938323001











































Отзывы: